| PicoScope 6424E | PicoScope 6404E | PicoScope 6403E | |
| 垂直規格 Vertical (analog channels) | |||
| 通道數 (Input channels) | 4 | 4 | 4 |
| 頻寬 (Bandwidth) | 500 MHz | 300 MHz | |
| 上升時間 (Rise time) | < 850 ps | < 1.3 ns | |
| 頻寬限制功能 (Bandwidth limit) | 20 MHz, selectable | ||
| 垂直解析度 (Vertical resolution) | 8, 10 or 12 bits 可調整解析度 | 8 bits 固定 | |
| 軟體增強解析度
(Enhanced vertical resolution) |
Up to 4 extra bits beyond ADC resolution | ||
| 輸入介面 (Input connector) | BNC(f) | ||
| 輸入特性 (Input characteristics) | 1 MΩ ±0.5% ∥ 12 pF ±1 pF, or 50 Ω ±2%. Single-ended. | ||
| 耦合 (Input coupling) | 1 MΩ AC/DC or 50 Ω DC | ||
| 靈敏度 (Input sensitivity) | 2 mV/div to 4 V/div (10 vertical divisions) | ||
| 輸入電壓範圍 (Input ranges (full scale)) |
1 MΩ ranges: ±10 mV, ±20 mV, ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10V, ±20 V | ||
| 50 Ω ranges: ±10 mV, then as above up to ±5 V | |||
| 準確度 (DC gain accuracy) | ±(0.5% of signal + 1 LSB) | ||
| 偏移範圍 Analog offset range (vertical position adjustment) |
±1.25 V (10 mV to 1 V ranges) | ||
| ±20 V (2 V to 20 V ranges) | |||
| 過電壓保護 (Overvoltage protection) |
1 MΩ ranges: ±100 V (DC + AC peak) up to 10 kHz | ||
| 50 Ω ranges: 5.5 V RMS | |||
| 數位通道規格 (digital channels with optional TA369 8-channel MSO pods) | |||
| 輸入通道 (Input channels) | 最高16通道 (每個TA369支援8通道) | ||
| 最高頻率 (Maximum frequency) | 500 MHz (1 Gb/s) | ||
| 最小可偵測脈波寬度 (Minimum detectable pulse width) |
1 ns | ||
| 輸入接頭 Input connector (probe tip) | Staggered signal and ground sockets for each channel, to accept 0.64 - 0.89 mm round or 0.64 mm square pin, 2.54 mm pitch | ||
| 輸入阻抗 (Input characteristics) | 101 kΩ ±1% ∥ 3.5 pF ±0.5 pF | ||
| 最大臨界電壓設定及增量 (Threshold range and resolution) |
±8 V in 5 mV steps | ||
| 解析度 (Threshold accuracy) | ±(100 mV + 3% of threshold setting) | ||
| 通道臨界電壓設定 (Threshold grouping) |
PicoScope 6: Two independent threshold controls, one per 8-channel port | ||
| PicoSDK: Individual threshold for each channel | |||
| 臨界電壓種類 (Threshold selection) | TTL, CMOS, ECL, PECL, user-defined | ||
| 最大電壓輸入 (Maximum input voltage at probe tip) |
±40 V up to 10 MHz, derated linearly to ±5 V at 500 MHz | ||
| 水平規格 - Horizontal | |||
| 最大取樣率 (8 bits) (Up to 2 channels and MSO pods) |
5 GS/s[1] | 5 GS/s[3] | 2.5 GS/s[3] (2 analog channels) |
| 5 GS/s (1 or no analog channels) | |||
| 最大取樣率 (8 bits) (Up to 4 channels and MSO pods) |
2.5 GS/s[2] | 2.5 GS/s | 1.25 GS/s (3-4 analog channels) |
| 2.5 GS/s [3] (2 analog channels) | |||
| 最大取樣率 (8 bits) (Up to 8 channels and MSO pods) |
1.25 GS/s | 1.25 GS/s | 1.25 GS/s |
| 最大取樣率 Maximum sampling rate (real time, 10-bit mode) | |||
| 1 analog channel or digital port | 5 GS/s | ||
| Up to 2 total analog channels and MSO pods | 2.5 GS/s[2] | ||
| Up to 4 total analog channels and MSO pods | 1.25 GS/s | ||
| Up to 8 total analog channels and MSO pods | 625 MS/s | ||
| Over 8 channels and digital ports | 312.5 MS/s | ||
| 最大取樣率 Maximum sampling rate (real time, 12-bit mode) | |||
| Up to 2 analog channels plus any MSO pods | 1.25 GS/s[1] | ||
| 記憶體 (Capture memory) | 4 GS (2 GS at 10/12-bit) | 2GS | 1 GS |
| (shared between active channels) | |||
| 時基範圍 (Timebase ranges) | 1 ns/div to 5000 s/div | ||
| 時基準確度 (timebase accuracy) | ±2 ppm | ||
| 時基偏移度 (Timebase drift) | ±1 ppm/year | ||
| 外部時脈 (External reference clock) | |||
| 輸入特性 Input characteristics | Hi-Z, AC coupled (> 1 kΩ at 10 MHz) | ||
| 頻率範圍 Input frequency range | 10 MHz ±50 ppm | ||
| 輸入介面 Input connector | Rear-panel BNC, dedicated | ||
| 輸入電壓 Input level | 200 mV to 3.3 V peak to peak | ||
| 過電壓保護 Overvoltage protection | ±5 V peak max | ||
| 觸發 Triggering | |||
| 來源 Source | Any analog channel, AUX trigger, plus digital ports with optional TA369 MSO pods | ||
| 觸發模式 Trigger modes | None, auto, repeat, single, rapid (segmented memory) | ||
| 先進觸發種類 Advanced trigger types (analog channels) |
Edge, window, pulse width, window pulse width, level dropout, window dropout, interval, runt, logic Logic allows arbitrary combinations of up to 4 analog channels or MSO ports | ||
| 靈敏度Trigger sensitivity (analog channels) | Digital triggering provides 1 LSB accuracy up to full bandwidth of scope | ||
| 數位通道觸發種類 Trigger types (digital inputs) |
With optional MSO pods: Edge, pulse width, dropout, interval, pattern, logic (mixed signal) | ||
| 外部觸發規格 Auxiliary trigger I/O | |||
| 介面 Connector type | Rear-panel BNC | ||
| 觸發種類 Trigger types (triggering scope) | Edge, pulse width, dropout, interval, logic | ||
| 輸入頻寬 Input bandwidth | > 10 MHz | ||
| 輸入特性 Input characteristics | 2.5 V CMOS Hi-Z input, DC coupled | ||
| 臨界電壓值 Threshold range | Fixed threshold, 1.25 V nominal | ||
| 過電壓保護 Overvoltage protection | ±20 V peak max | ||
| 函數波產生器 Function generator | |||
| 標準輸出波形 Standard output signals | Sine, square, triangle, DC voltage, ramp up, ramp down, sinc, Gaussian, half-sine | ||
| 輸出頻率 Standard signal frequency | Sine: 100 μHz to 50 MHz; Square: 100 μHz to 50 MHz; Other waves: 100 μHz to 1 MHz | ||
| 頻率準確度Output frequency resolution | 0.002 ppm | ||
| 掃頻模式 Sweep modes | Up, down, dual with selectable start/stop frequencies and increments | ||
| 頻率範圍 Sweep frequency range | Sine / square waves: 0.075 Hz to 50 MHz | ||
| Other waves: 0.075 Hz to 1 MHz | |||
| Swept frequencies down to 100 μHz are possible using PicoSDK with some restrictions | |||
| 輸出電壓範圍 Output voltage range | ±5 V into open circuit; ±2.5 V into 50 Ω | ||
| 電壓調整 Output voltage adjustment | Signal amplitude and offset adjustable in < 1 mV steps within overall range | ||
| 直流準確度 DC accuracy | ±(0.5% of output voltage + 20 mV) | ||
| 輸出阻抗 Output resistance | 50 Ω ±3% | ||
| 介面種類 Connector type | Rear-panel BNC | ||
| 過電壓保護 Overvoltage protection | ±20 V peak max | ||
| 任意波形產生器 Arbitrary waveform generator | |||
| 取樣率 Update rate | Variable from < 1 S/s to 200 MS/s with < 0.02 ppm resolution | ||
| 記憶體 Buffer size | 40 kS | ||
| 垂直解析度 Vertical resolution | 14 bits (output step size < 1 mV) | ||
| 頻寬 Bandwidth | No filter: 100 MHz | ||
| Filtered: 50 MHz | |||
| 上升時間 Rise time (10% to 90%) | No filter: 3.5 ns | ||
| Filtered: 6 ns | |||
| 探棒支援 Probe support | |||
| 主動探棒介面 Active probe interface | Active probe interface on four channels supporting A6000 Series active probes. Probe interface supplies power and controls the active probe. | ||
| 探棒偵測 Probe detection | Automatic detection of P2036 (300 MHz) and P2056 (500 MHz) 10:1 oscilloscope probes | ||
| 探棒補償接頭 Probe compensation pin | 1 kHz, 2 V peak to peak square wave, 600 Ω | ||
| 頻譜分析功能 Spectrum analyzer | |||
| 頻率範圍 Frequency range | DC to 500 MHz | DC to 300 MHz | |
| 顯示模式 Display modes | Magnitude, average, peak hold | ||
| Y axis | Logarithmic (dbV, dBu, dBm, arbitrary dB) or linear (volts) | ||
| X axis | Linear or logarithmic | ||
| 視窗選項 Windowing functions | Rectangular, Gaussian, triangular, Blackman, Blackman−Harris, Hamming, Hann, flat-top | ||
| FFT運算點數 Number of FFT points | Selectable from 128 to 1 million in powers of 2 | ||
| 數學運算功能 Math channels | |||
| 功能 Functions | −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, delay, average, frequency, derivative, integral, min, max, peak, duty, highpass, lowpass, bandpass, bandstop, coupler | ||
| 運算子 Operands | A to H (input channels), T (time), reference waveforms, pi, 1D0 to 2D7 (digital channels), constants | ||
| 自動量測功能 Automatic measurements | |||
| 示波器模式 Scope mode | AC RMS, true RMS, frequency, cycle time, duty cycle, DC average, falling rate, rising rate, low pulse width, high pulse width, fall time, rise time, minimum, maximum, peak to peak | ||
| 頻譜模式 Spectrum mode | Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD | ||
| 統計功能 Statistics | Minimum, maximum, average, standard deviation | ||
| 串列訊號解碼 Serial decoding | |||
| 協定種類 Protocols | 1-Wire, ARINC 429, BroadR-Reach, CAN & CAN FD, DALI, DCC, DMX512, Ethernet 10Base-T and 100Base-TX, FlexRay, I²C, I²S, LIN, PS/2, Manchester, Modbus, SENT, SPI, UART (RS-232 / RS-422 / RS-485), and USB 1.1 | ||
| 遮罩測試功能 Mask limit testing | |||
| 統計 Statistics | Pass/fail, failure count, total count | ||
| 遮罩編輯 Mask creation | User-drawn, table entry, auto-generated from waveform or imported from file | ||
| 顯示 Display | |||
| 連線方式 Interpolation | Linear or sin(x)/x | ||
| 波形累積模式 Persistence modes | Digital color, analog intensity, custom, fast | ||
| 軟體 Software | |||
| 作業系統支援 OS support | Windows 7, 8 and 10; Linus, macOS | ||
| 語言 Languages | Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish | ||
| 一般規格 General specifications | |||
| PC connectivity | USB 3.0 SuperSpeed (USB 2.0 compatible) | ||
| Power requirement | 12 V DC from supplied PS016 PSU. Up to 7 A including powered accessories. | ||
| Ground terminal | Functional ground terminal accepting wire or 4 mm plug, rear-panel | ||
| Dimensions | 245 x 192 x 61.5 mm | ||
| Weight | 2.2 kg (scope only) | ||
| 5.6 kg (in carry case with PSU and cables) | |||
| Temperature range | Operating: 0 to 40 °C | ||
| For quoted accuracy after 20 minutes warm-up: 15 to 30 °C | |||
| Storage: –20 to +60 °C | |||
| Humidity range | Operating: 5% to 80% RH non-condensing | ||
| Storage: 5% to 95% RH non-condensing | |||
| Altitude range | Up to 2000 m | ||
| Safety compliance | Designed to EN 61010-1:2010 | ||
| EMC compliance | Tested to EN 61326-1:2013 and FCC Part 15 Subpart B | ||
| Environmental compliance | RoHS & WEEE compliance | ||
| PC requirements | Processor, memory and disk space: as required by the operating system | ||
| Ports: USB 3.0 (recommended) or 2.0 (compatible) | |||
| Warranty | 5 years | ||
| 數位探棒 MSO pod dimensions | |||
| MSO digital interface cable length | 500 mm (scope to pod) | ||
| MSO probe flying lead length | 225 mm (pod to probe tip) | ||
| MSO pod size | 75 x 55 x 18.2 mm | ||
| MSO probe size | 34.5 x 2.5 x 6.7 mm (including ground clip) | ||